USB Device Over Current Status Detected error on Windows computer

Desember 30, 2021 Posting Komentar

Download PC Revivif Tool to quickly find & fix Windows errors mechanically

If you receive the USB Device All over Current Status Noticed error notification message when you power on your Windows 11 surgery Windows 10 computer, so this post is intended to help you. In this post, we testament provide the nigh suitable solutions affected users keister try to successfully resolve this issue.

What is an overcurrent error?

In a nutshell, if there's an overcurrent or "E" code, the electric current on one or more wires connected to your Snuggle thermostat has spiked multiple times. Nest thermostats have an intrinsic breaker to avail prevent damage, and in that respect will appear an overcurrent code if the surf has been tripped 10 multiplication operating theatre more.

USB Device Over Afoot Status Sensed

If you'Ra round-faced with this issue, you can examine our recommended solutions below in no picky order and see if that helps to resolve the USB Twist Over Current Status Detected error on your Windows 11/10 computing device.

Diagnose and connect USB devices one by one
Disconnect frontal USB ports
Check for missing jumper
Update BIOS
Replace MOBO

Let's take a consider the description of the swear out involved concerning from each one of the listed solutions.

1] Diagnose and connect USB devices one at a time

Do the following:

Turn your computer bump off.
Unplug all the USB devices from your computer.
Look for leastways 1 infinitesimal and bi your computer back on again.
Try to punch your USB devices in, one after another.

You need to restart your computer later on plugging in 1 USB device. This means, you might beryllium able to incu the culprit device. If you manage to find the device or or nam the USB left causing this USB Gimmick Over Current Status Detected error, you lav simply try to ward of using the device/USB left.

Proceed with the next solution if this action didn't help.

2] Disconnect front USB ports

You may take the services of a PC hardware technician.

Do the following:

Close your computer completely.
Unplug the power cable from the socket.
Open your reckoner's case.
Once you see the motherboard, search for USB connectors.
Once you have located the pins and socket, unplug the connector.
Now tour along your computer and see if the error message persists.

If the computer error message doesn't reappear, it means the USB socket was difficult. In this case, you can get it replaced.

3] Tick for missing jumper

You Crataegus laevigata require the services of a Microcomputer hardware technician.

Act up the following:

Shut down your computer completely.
Unplug the big businessman cable from the socket.
Yawning your computer's pillow slip.
Check your USB internal port wine to see if there's a missing jumper in the USB internal ports. If you see a spot is missing a jump shot, put a jumper to short 1 and 2.
Restart your computer.

Along boot, check if the issue at hired hand is resolved. If not, try the next solution.

4] Update BIOS

This solution requires you to try updating the BIOS and firmware on your system.

Exploitation tools from OEMs is the easiest way to DO so. All OEM manufacturers have utilities that help you easily update, BIOS, firmware, and drivers. Seek for yours and download it from the official site alone.

This is the safest way to update the BIOS.

If you own a Dingle laptop you lavatory head all over to Dell.com, or you could use Dell Update Public-service corporation.
ASUS users give the sack download the MyASUS BIOS update utility from the Microsoft Put in.
ACER users can go here. Enter your Serial Number/SNID or search for your cartesian product by Exemplar, choose BIOS/Firmware, and pawl the Download link for the Indian file you want to download.
Lenovo users can use the Lenovo System Update Tool.
HP users send away habituate the bundled HP Keep Assistant.

Once you complete the manual update of the BIOS/microcode along your system, bridle if the issue is resolute. If not, proceed with the next solution.

5] Replace MOBO

If nothing has worked sol far and you have a modern motherboard installed on your computer for the first time, it is possible that the motherboard is malfunctioning and there are some modules damaged. In this encase, if the MOBO is still under warranty, you can take the MOBO replaced.

How do I check if my USB ports are malfunctioning?

To check if your USB ports are malfunctioning on your Windows 11/10 scheme you can use the Device Director method to scan for hardware changes. Follow these operating instructions: Click Start, typecast run in the hunting bar, then fall into place Take to the woods. Typewrite devmgmt. In Device Handler, click your computer so that it is highlighted. Pawl Action, and then click Scan for hardware changes. Check the USB device to see whether it is working.

How do you fix a USB porthole malfunction?

If you're experiencing a USB port malfunction on your Windows 11/10 device, you can fix USB Larboard Issues by applying any of these suggestions:

Restart your computer.
Look for debris in the USB port.
Check for light or broken internal connections.
Test a different USB porthole.
Swap to a different USB overseas telegram.
Fire hydrant your twist into a divers computer.
Try plugging in a different USB device.
Check the Device Manager (Windows).

Hope the post helps you.

Obinna Onwusobalu, has studied Information & Communication Technology and is a keen follower of the Windows ecosystem. Atomic number 2 runs a computer software clinic. He says it's first practice to create a System Repair Point ahead qualification any changes to your PC.